Guangzhou Mecan Trading Co., Ltd.

Dialysis Machine Manufacturer blood dialysis machine
model:2028
1. Volume (length× width ×height):
370mm×340mm ×1570mm
2. Weight: about 90kg
3. Power supply voltage:
AC220V/110V 50HZ / 60 HZ ,Power: 1500W

4. Blood pump/spare pump:
?Flux: 15 ~ 340ml/min (D 6mm)
20 ~ 460 ml/min (D 8mm)
5. Heparin pump:
?Flux: 0ml/h~10ml/h(±5%)
?Precise: 0.1ml/h
Injector size: 20ml/30ml/50ml
10ml/20ml/30ml (selectable)
6. Arterial pressure:
?display scope:-300mmHg~+300mmHg
(±10mmHg)
7. Venous pressure:
?display scope:-50mmHg~+300mmHg
(±10mmHg)

8. Dialysate flow:
300ml/min~800ml/min linearity adjustable (+10%) (-5%)
Temperature:35.0ºC~39.0ºC
Resolving rate:0.1ºC
Conductivity:13mS/cm~15.5mS/cm (±0.1 mS/cm)

9. UF flow scope: 0~1800ml/h(±30ml/h )
0~4000ml/h(optional)
10. ISO UF flow scope:0~2000ml/h(±30ml/h)
11. TMP: Scope:-100mmHg~+600mmHg (±20mmHg)
12. Blood leakage monitor:
over 1ml blood per liter dialysate (flow:500ml/min)
13. Blood level monitor: ultrasonic sensor
14. Air bubble monitor:
Infrared and response threshold value:
Single air bubble of 200 I exists when
Blood flux is 200ml/min
15. Inflow pressure:0MPa~0.6MPa
16. Inflow temperature: 5ºC~30ºC
17. Environment temperature: 10ºC~30ºC,
Relative humidity≤70%
18. Rinse/disinfection: chemical disinfection
(citric acid,peracetic acid and oxalic acid)

19. Hot rinse: 80ºC
20. Back-up power supply: last for 15-30min after electric-cut.